FERROUS METALS
Coatings systems below are divided by
  1. Environmental Classifications
   IMMERSION: (IMMR) NOT RECOMMENDED WHEN ABRASIVE BLAST IS NOT POSSIBLE
   EXTREME:(EXTR)  Substrate is within 25 yards of strong corrosive chemical mists or fumes, dust, smoke, or other
   contaminants combined with high humidity and condensed moisture. Frequent spill and splash
   MODERATE: (MODR) Substrate is over 25 yards from Extreme Chemicals or exposed to less corrosive chemical fumes 
|  and contaminants. Occasional spill and splash
   NORMAL: (NORM) Light to moderate chemical exposure.

  2.Available Surface Preparation
     ABRASIVE BLAST IS POSSIBLE
     ABRASIVE BLAST IS NOT POSSIBLE  

  3. Gloss and color Retention
      Epoxies other than Acrylic epoxy will loose gloss and chalk in exterior exposures, but adhesion or
      performance of coating will not be affected. Will be classified gloss/chalk
                                                    

                                                              ABRASIVE BLAST IS POSSIBLE
ENVIRO
NMENT		 SURFACE
PREP.		 SYSTEM              PRODUCTS DFT PER
COAT
(MILS)		 DFT
SYSTEM
(MILS)		 VOC GLOSS SYSTEM PROPERTIES
IMMR SP-5, SP-10 EL1001 1st  Coat HI-CHEM 100 Epoxy
2nd Coat HI-CHEM 100 Epoxy		 9.0
9.0		 18 4.73 SEMI Excellent protection on steel, masonry, wood and brick exposed to water, industrial waste, corrosive fumes, acids, alkalies and salts. On interior, exterior, submerged and non-submerged surfaces exposed to corrosive environments. For pipes including both steel and concrete.